Triple S Manufacturing
Triple'S Manufacturing

TSM WATER TUBE HOT WATER BOILER

BC SERIES

 

Triple'S Manufacturing

Shown with Optional Stainless Steel Electrical Controls Enclosure & Door Mounted Main Electrical Power Disconnect Switch

Triple'S Manufacturing

Copper Finned Tube Heat Exchanger Includes heavy welded plate steel manifold boxes & 3 rows of copper tubes. Access Covers on each end allow easy tube inspection & cleaning.

Triple'S Manufacturing

Copper Finned Tube
Heat Exchanger Includes heavy welded plate steel manifold boxes &
3 rows of copper tubes. Access Covers on each end allow easy tube inspection
& cleaning.

Heating Specifications:

Heat Outputs from 320,000 BTU per hour
(10 BHP) to 1,920,000 BTU per hour (60 BHP)

Features:

  • Built in compliance with the latest Edition & Addenda of Section IV of the A.S.M.E. Code.
  • Listed with the National Board of Boiler & Pressure Vessel Inspectors.
  • STRAIGHT TUBE HEAT EXCHANGER - with copper finned & plain tubes.The tubes are mechanically rolled into the steel tube sheet.
  • STAINLESS STEEL CABINET.
  • HIGH EFFICIENCY NATURAL GAS ATMOSPHERIC TYPE BURNER. With an Electronic Flame Control System & a heavy gauge welded steel manifold
  • HIGH TEMPERATURE CERAMIC FIBER BLANKET FIREBOX INSULATION.
  • CONTROL THERMOSTAT.
  • HIGH LIMIT THERMOSTAT.
  • SAFETY WATER FLOW SWITCH.
  • SAFETY WATER PRESSURE SWITCH.
  • PRESSURE RELIEF VALVE.
  • TEMPERATURE & PRESSURE GAUGE.
  • 16” DIAMETER GALVANIZED DRAFT HOOD (Down Draft Diverter - not shown).
  • NEMA 12 PAINTED ELECTRICAL CONTROLS ENCLOSURE. Available with a Main Electrical Disconnect Switch and/or a Stainless Steel Electrical Enclosure.

    Including:A Control Power Transformer, Motor Starter for the Circulating Pump, LED Indicator Lights, Selector Switches and all necessary control components required to form a complete electrical system.
Triple'S Manufacturing

Easily removable Natural Gas or Propane Atmospheric Burner. Designed for a minimum 82% combustion efficiency. Includes a heavy gauge welded steel burner manifold with brass or stainless steel burner orifices.

BOILER FEED SYSTEM PACKAGE

TRIPLE “S” MANUFACTURING COMPANY

TSM Boiler Feed Systems are constructed to be durable & easy to maintain & service.

The tank is constructed of carbon steel plate with a minimum thickness of 1/4”. The support frame is constructed of carbon steel square & rectangular tubing with angle iron pump mounts to allow easy access to the pumps for servicing. The structural tubing provides superior strength & stability in comparison to most Boiler Feed Systems that are constructed with angle iron support frames.

 

A Boiler Feed Pump is included for each boiler in the steam system & an additional “spare” boiler feed pump is also included. All of the pumps will be piped to a common discharge piping manifold including valves that will allow the spare pump to take the place of any pump that is down for servicing. The electrical control system will include control relays & switches that will allow the spare pump to be automatically controlled by any boiler in the system when it is taking the place of a pump that is down.

 

The standard water make-up system includes a brass Float Type Water Fill Valve. An optional electronic control relay with High & Low Level Probes & an electric water solenoid valve is also available.

Triple'S Manufacturing
Triple'S Manufacturing

Standard Equipment:

  • Pre-Piped Pump Suction and Discharge Pipe Lines.
  • Strainers and Shut-Off Valves in the Pump Suction Pipe Lines.
  • Check Valves and Shut-Off Valves in the Pump Discharge Pipe Lines.
  • Pre-Piped Overflow and Drain Piping with a Drain Valve.
  • 3/4” Brass Float Valve for water fill & make-up.
  • Water Level Sight Glass.
  • Water Level Sight Glass.
  • Temperature Gauge.
  • Pre-Wired NEMA 12 Electrical Controls Enclosure with Motor Starters, “Hand-Off-Auto” Selector Switches, Pilot Lights, Etc.
  • Support Frame constructed of heavy wall structural carbon steel tubing with angle iron pump brackets for easy pump servicing

Optional Equipment:

  • Electronic Water Level Control Relay with High & Low Level Probes &
    an Electric Water Solenoid Valve.
  • Door Mounted Main Electrical Disconnect Switch with integral 3 Pole Circuit Breaker.
  • NEMA 4 Stainless Steel Electrical Enclosure.
  • Flanged & Dished Tank Heads.

TSM WATER TUBE HOT WATER BOILER

FDGLN SERIES

Designed to meet Nitrogen Oxide Emission Regulations
of a maximum of 30 parts per million or less

Heating Specifications:
Heat Outputs from 700,000 BTU per hour (20 BHP)
to 2,000,000 BTU per hour (60 BHP)

Triple'S Manufacturing

Features:

  • Built in compliance with the latest Edition & Addenda of Section IV of the A.S.M.E. Code.
  • Listed with the National Board of Boiler & Pressure Vessel Inspectors.
  • STRAIGHT TUBE HEAT EXCHANGER - with carbon steel tubes. The tubes are mechanically rolled into the steel tube sheet.
  • STAINLESS STEEL CABINET.
  • FORCED DRAFT LOW NOx BURNER ASSEMBLY.
    With a full modulation firing rate & an Electronic Flame Control System. Designed to meet NOx (Nitrogen Oxide) emission regulations of a maximum of 30 parts per million of Nitrogen Oxides.
  • HIGH TEMPERATURE CERAMIC FIBER BLANKET FIREBOX INSULATION.
  • CONTROL THERMOSTAT.
  • FIRING RATE CONTROLLER.
  • HIGH LIMIT THERMOSTAT.
  • SAFETY WATER FLOW SWITCH.
  • SAFETY WATER PRESSURE SWITCH.
  • PRESSURE RELIEF VALVE.
  • TEMPERATURE & PRESSURE GAUGE.
  • NEMA 12 PAINTED ELECTRICAL CONTROLS ENCLOSURE.
    Mounted on the side of the Boiler.
    Including: A Door mounted Main Electrical Disconnect Switch with door interlock, Circuit Breaker, Control Transformer, Motor Starter for the Circulating Pump, Indicator Lights, Selector Switches and all necessary control components required to form a complete electrical system.
Triple'S Manufacturing

Steel Finned Tube Heat ExchangerIncludes heavy welded plate steel manifold boxes with 1 row of steel finned tubes & 5 rows of steel plain tubes. Access Covers on each end allow easy tube inspection & cleaning. Individual tube Replacement is possible.

TSM PACKAGED 2 STAGE HEATING SYSTEM

FOR HEATING LIQUIDS FOR C.I.P. SYSTEMS, BOTTLE WARMERS OR CAN WARMERS

Triple'S Manufacturing

TWO STAGE DESIGN:

THIS SYSTEM IS IDEAL FOR HEATING SANITARY LIQUIDS. FOR THIS APPLICATION, ALL OF THE COMPONENTS IN CONTACT WITH THE SANITARY LIQUID WILL BE CONSTRUCTED OF TYPE 304 STAINLESS STEEL.

 

THIS SYSTEM IS ALSO GREAT FOR HEATING BOTTLE OR CAN WARMERS. THE WATER FROM THE WARMER WILL FLOW THROUGH THE SHELL & TUBE HEAT EXCHANGER & NOT THROUGH THE BOILER HEAT EXCHANGER. THIS PREVENTS DIRTY WATER FROM ENTERING THE BOILER. THE HEATING WATER FLOWING THROUGH THE BOILER WILL REMAIN CLEAN, THUS EXTENDING THE LIFE OF THE BOILER & ELIMINATING THE NEED TO CLEAN THE BOILER TUBES.

 

CHEMICAL TREATMENT OF THE BOILER WATER IS NOT REQUIRED, THUS SAVING HUNDREDS OF DOLLARS IN CHEMICAL COSTS WHEN COMPARED TO A CENTRAL STEAM OR HOT WATER BOILER SYSTEM.

 

Triple'S Manufacturing

 

HEAT OUTPUT SIZED TO FIT YOUR APPLICATION:
AVAILABLE WITH HEAT OUTPUTS FROM 320,000 BTU PER HOUR
TO 5,760,000 BTU PER HOUR.

 

HIGH TEMPERATURE CAPABILITY:
THIS SYSTEM HEATS WATER OR OTHER LIQUIDS
UP TO 195 DEGREES FAHRENHEIT.

 

CLEAN EFFICIENT FIRING:
AVAILABLE FOR NATURAL GAS OR PROPANE
ALSO AVAILABLE WITH LOW NOx (Nitrogen Oxide) EXHAUST EMISSION RATING.

 

ACCURATE TEMPERATURE CONTROL:
THE CONTROL SYSTEM INCLUDES AN ELECTRONIC TEMPERATURE CONTROLLER, AN ELECTRONIC/PNEUMATIC TRANSDUCER AND A THREE WAY PROPORTIONAL TEMPERATURE CONTROL VALVE WITH A PNEUMATIC ACTUATOR. THESE COMPONENTS WORKING TOGETHER INSURE ACCURATE CONTROL OF THE PRODUCT TEMPERATURE.

Triple'S Manufacturing

2 Stage System

TSM Water Tube Hot Water Boiler and a Plate and Frame Heat Exchanger in a complete package designed to heat sanitary liquids such as C.I.P. Cleaning Solutions, Drinking Water.

Read More