Triple S Manufacturing
Triple'S Manufacturing

TSM PACKAGED 2 STAGE HEATING SYSTEM

FOR HEATING LIQUIDS FOR C.I.P. SYSTEMS, BOTTLE WARMERS OR CAN WARMERS

Triple'S Manufacturing

 

TWO STAGE DESIGN:

A TSM HOT WATER BOILER PRODUCES HOT WATER THAT IS CIRCULATED IN A CLOSED LOOP THROUGH THE SHELL SIDE OF A SHELL & TUBE HEAT EXCHANGER. THE HEAT EXCHANGER TRANSFERS THE HEAT FROM THE HEATING WATER TO THE PRODUCT AS IT FLOWS THROUGH THE TUBES OF THE HEAT EXCHANGER

 

THIS SYSTEM IS IDEAL FOR HEATING SANITARY LIQUIDS. FOR THIS APPLICATION, ALL OF THE COMPONENTS IN CONTACT WITH THE SANITARY LIQUID WILL BE CONSTRUCTED OF TYPE 304 STAINLESS STEEL.

 

THIS SYSTEM IS ALSO GREAT FOR HEATING BOTTLE OR CAN WARMERS. THE WATER FROM THE WARMER WILL FLOW THROUGH THE SHELL & TUBE HEAT EXCHANGER & NOT THROUGH THE BOILER HEAT EXCHANGER. THIS PREVENTS DIRTY WATER FROM ENTERING THE BOILER. THE HEATING WATER FLOWING THROUGH THE BOILER WILL REMAIN CLEAN, THUS EXTENDING THE LIFE OF THE BOILER & ELIMINATING THE NEED TO CLEAN THE BOILER TUBES.

 

CHEMICAL TREATMENT OF THE BOILER WATER IS NOT REQUIRED, THUS SAVING HUNDREDS OF DOLLARS IN CHEMICAL COSTS WHEN COMPARED TO A CENTRAL STEAM OR HOT WATER BOILER SYSTEM.

 

HEAT OUTPUT SIZED TO FIT YOUR APPLICATION:

AVAILABLE WITH HEAT OUTPUTS FROM 320,000 BTU PER HOUR TO 5,760,000 BTU PER HOUR.

 

HIGH TEMPERATURE CAPABILITY:

THIS SYSTEM HEATS WATER OR OTHER LIQUIDS UP TO 185 DEGREES FAHRENHEIT.

 

CLEAN EFFICIENT FIRING:

AVAILABLE FOR NATURAL GAS, PROPANE. OR FUEL OIL ALSO AVAILABLE WITH LOW NOx (Nitrogen Oxide) EXHAUST EMISSION RATING.

 

Triple'S Manufacturing

 

SHELL & TUBE HEAT EXCHANGER
AVAILABLE WITH ALL STAINLESS STEEL COMPONENTS.

FOR HEATING SANITARY LIQUIDS
Equipped with a Low NOx (Nitrogen Oxide) FORCED DRAFT BURNER

Triple'S Manufacturing

TWO STAGE DESIGN:

The TSM hot water boiler produces 230 degree f. Hot water that is circulated in a closed pressurized loop through the heating water side of a plate & frame heat exchanger.
The heat exchanger transfers the heat from the heating water to the product as it flows through the plates on the product side of the heat exchanger.

 

This system is ideal for heating sanitary liquids. All of the components in contact with the sanitary liquid will be constructed of type 304 or type 316 stainless steel.

 

Because the heating water is contained in a closed pressurized loop, chemical treatment of the boiler water is not required, thus saving hundreds of dollars in Chemical costs when compared to a central steam or hot water boiler system.

 

In addition, this system is completely assembled including all necessary system piping & wiring. The only field installation requirements are the product liquid connections & the necessary utility connections which include the fuel supply, water supply, air supply & electrical power. This saves hundreds of dollars in installation costs when compared to a central steam or Hot water boiler system.

 

HEAT OUTPUT SIZED TO FIT YOUR APPLICATION:

Available With Heat Outputs From 320,000 Btu Per Hour To 5,760,000 Btu Per Hour.

 

HIGH TEMPERATURE CAPABILITY:

This system heats water or other liquids up to 190 degrees Fahrenheit.

 

CLEAN EFFICIENT FIRING:

Available with natural gas or propane fired burners that meet exhaust emission limits of 12 or 30 parts per million of nitrogen oxides.

 

ACCURATE TEMPERATURE CONTROL:

The control system includes an electronic temperature controller, an electronic/pneumatic transducer and a three way proportional temperature control valve with a pneumatic actuator. These components working together insure accurate control of the product temperature.

ACCURATE TEMPERATURE CONTROL: MODEL: BC241/SX19/3WV FOR HEATING SANITARY WATER, C.I.P. SOLUTIONS OR OTHER LIQUIDSR

Triple'S Manufacturing

TSM TWO STAGE - WATER HEATED - HEATING SYSTEM - MODEL BC241/SX19/3WV

Fuel Type: Natural Gas
Total Heat Output: 1,920,000 BTU per hour

 

INCLUDING:
1 each - TSM WATER TUBE HOT WATER BOILER MODEL BC-241
1 each - PLATE & FRAME HEAT EXCHANGER PACKAGE MODEL SX19/3WV
1 each - THREE WAY MODULATING TEMPERATURE CONTROL VALVE WITH A PNEUMATIC ACTUATOR
1 each - ELECTRONIC TEMPERATURE CONTROLLER
1 each - NEMA 12 ELECTRICAL CONTROLS ENCLOSURE - Available in Stainless Steel
1 each - HEATING WATER CIRCULATING PUMP
1 each - BLADDER TYPE EXPANSION TANK
1 each - IN-LINE AIR SEPARATOR TANK

 

COMPLETE PACKAGED HEATING SYSTEM:

ALL OF THE HEATING SYSTEM COMPONENTS ARE MOUNTED ON A TUBULAR STEEL SKID. THE SYSTEM IS COMPLETELY PIPED & WIRED AT THE FACTORY.
THE ONLY FIELD CONNECTIONS REQUIRED ARE: ELECTRICAL POWER SUPPLY, NATURAL GAS FUEL SUPPLY, CITY WATER SUPPLY, PNEUMATIC AIR SUPPLY, GAS VENT PIPING, BOILER EXHAUST STACK PIPING & HEATED LIQUID SUPPLY & RETURN PIPING.


TWO STAGE DESIGN:

THE TSM WATER TUBE HOT WATER BOILER PRODUCES 230 DEGREE F. HOT WATER THAT IS CIRCULATED IN A CLOSED LOOP THROUGH THE HEATING SIDE OF A PLATE & FRAME HEAT EXCHANGER. THE HEAT EXCHANGER TRANSFERS THE HEAT TO THE PRODUCT AS IT FLOWS THROUGH THE PRODUCT SIDE OF THE HEAT EXCHANGER.


ACCURATE TEMPERATURE CONTROL:

THE TEMPERATURE CONTROL SYSTEM INCLUDES AN ELECTRONIC TEMPERATURE CONTROLLER,
AN ELECTRONIC/PNEUMATIC TRANSDUCER AND A THREE WAY MODULATING TEMPERATURE CONTROL VALVE WITH A PNEUMATIC ACTUATOR. THESE COMPONENTS WORKING TOGETHER PROVIDE VERY ACCURATE CONTROL OF THE TEMPERATURE OF THE HEATED LIQUID. IN ADDITION, AN EXTERNAL 4 TO 20 MILLIAMP SIGNAL MAY BE SUPPLIED BY THE CUSTOMER TO CONTROL THE TEMPERATURE OF THE HEATED LIQUID.

TSM TWO STAGE - WATER HEATED - HEATING SYSTEM - MODEL BC241/SX19/3WV

Triple'S Manufacturing

TWO STAGE DESIGN:

HOT WATER BOILERS PRODUCE HOT WATER THAT
IS CIRCULATED IN A CLOSED LOOP THROUGH THE SHELL SIDE OF A SHELL & TUBE HEAT EXCHANGER. THE HEAT EXCHANGER TRANSFERS THE HEAT FROM THE HEATING WATER
TO THE PRODUCT AS IT FLOWS THROUGH THE TUBES OF THE HEAT EXCHANGER.

 

THIS SYSTEM IS IDEAL FOR HEATING SANITARY LIQUIDS. FOR THIS APPLICATION, ALL OF THE COMPONENTS IN CONTACT WITH THE SANITARY LIQUID WILL BE CONSTRUCTED OF TYPE 304 STAINLESS STEEL.

 

THIS SYSTEM IS ALSO GREAT FOR HEATING BOTTLE OR CAN WARMERS. THE WATER FROM THE WARMER WILL FLOW THROUGH THE SHELL & TUBE HEAT EXCHANGER & NOT THROUGH THE BOILER HEAT EXCHANGER. THIS PREVENTS DIRTY WATER FROM ENTERING THE BOILER. THE HEATING WATER FLOWING THROUGH THE BOILER WILL REMAIN CLEAN, THUS EXTENDING THE LIFE OF THE BOILER & ELIMINATING THE NEED TO CLEAN THE BOILER TUBES.

 

CHEMICAL TREATMENT OF THE BOILER WATER IS NOT REQUIRED, THUS SAVING HUNDREDS OF DOLLARS IN CHEMICAL COSTS WHEN COMPARED TO A CENTRAL STEAM OR HOT WATER BOILER SYSTEM.

Triple'S Manufacturing

 

HEAT OUTPUT SIZED TO FIT YOUR APPLICATION:

AVAILABLE WITH HEAT OUTPUTS FROM 320,000 BTU PER HOUR TO 5,760,000 BTU PER HOUR.


HIGH TEMPERATURE CAPABILITY:

THIS SYSTEM HEATS WATER OR OTHER LIQUIDS UP TO 195 DEGREES FAHRENHEIT.


CLEAN EFFICIENT FIRING:

AVAILABLE FOR NATURAL GAS OR PROPANE.
ALSO AVAILABLE WITH LOW NOx (Nitrogen Oxide) EXHAUST EMISSION RATING.


ACCURATE TEMPERATURE CONTROL:

THE CONTROL SYSTEM INCLUDES AN ELECTRONIC TEMPERATURE CONTROLLER, AN ELECTRONIC/PNEUMATIC TRANSDUCER AND A THREE WAY PROPORTIONAL TEMPERATURE CONTROL VALVE WITH A PNEUMATIC ACTUATOR. THESE COMPONENTS WORKING TOGETHER INSURE ACCURATE CONTROL OF THE PRODUCT TEMPERATURE.


Triple'S Manufacturing

2 Stage System

TSM Water Tube Hot Water Boiler and a Plate and Frame Heat Exchanger in a complete package designed to heat sanitary liquids such as C.I.P. Cleaning Solutions, Drinking Water.

Read More